HUNAN KINGCERA ENGINEERING CO.,LTD
- Address:NO.18,East Twelve Road,Changsha Economic and Technological Development Zone,China
- Postcode:410100
- Fax:+86-731-84069186
- E-mail:info@kingcera.com
- Website:http://es.kingcera.com
- Sales office
- Tel:+86-731-84019856
- Fax:+86-731-84069186
- E-mail:sales@kingcera.com
- Service office
- Tel:+86-731-84067818
Weldable Ceramic tiles lined pipe fittings
2018-11-05
Kingcera have mainly three type of ceramic lined pipe fittings by different installations. Ceramic tiles lined pipe fittings, weldable ceramic tiles lined pipe fittings and ceramic sleeve lined pipe fittings. These wearimpacthigh-temperatur...
Kingcera’s ceramic lined pipes fittings
2018-10-22
Kingcera have mainly three type of ceramic lined pipe fittings by different installations. Ceramic tiles lined pipe fittings, weldable ceramic tiles lined pipe fittings and ceramic sleeve lined pipe fittings. These wearimpacthigh-temperatur...
Kingcera’s Ceramic Lagging for the belt pulley
2018-10-15
There are many conveying belt pulleys in the steel industry, cement factory, port ,mining for material conveying. Usually, the pulleys are wrapped by a layer of rubber to prevent the abrasions .The material or the clay are easy to bond the...
Application of KINGCERA wear resistant ceramic lining in cylinder mixer
2018-10-08
The cylinder mixer is one of the important equipments in the production of sintering. The working principle is to wet and mix the configured sintered ore raw materials, so that the moisture, the particle size and the components of the ingre...
Why ZTA Ceramic Is So Popular When Compared To Common Alumina Ceramic
2018-10-04
Alumina ceramics are of great industrial importance. With its high wear resistance, low thermal expansivity, low electric conductivity, they are widely used in abrasion-resistant liners and electronic circuit carrier substrate. At present,...
Kingcera Wear Abrasion Ceramic Sleeve Lined Pipe And Elbow Applied In Lithium Battery Industry
2018-09-03
Kingcera 95% alumina ceramic sleeve lined pipes, elbows and T pipes have been largely applied in lithium battery material conveying system in recently years. Its a very big step for Kingcera to develop our products in a new industry. Our pr...
How to choose a suitable and long-last elbow for pneumatic conveying
2018-08-31
Elbows also called bends which are widely used in the pneumatic conveying system in order to providing a change in material-flow direction. How to choose a proper elbow and keep your system running smoothly at the peak performance is of sig...
Ceramic Wear Plate Liners – Transfer Chute
2018-08-27
Material: Iron Ore 12,000 tonnes per hour Location: Port Hedland, Western Australia Solution: Kingcera wear liners comprise of advanced ceramic tiles, bonded in a high tensile strength rubber matrix to a studded steel backing plate. All our...
